Forklift Operator Exam I Copy

Before loading or unloading a trailer at a loading dock you should:

During extreme hot / cold days when its difficult to maintain building temperature while taking loads through the bay doors you should

When parking or leaving your truck you should

The front wheels of a lift truck serve as the ___________________________ between the weight of the truck and the weight of the load being carried 

It is safe for you to give someone a ride on your lift truck

The load capacity of a lift truck can be found on its data plate.

The gauge shown below is a/an                                                                                                                                          

The three major parts of a lift truck are the body (truck), overhead guard, and the hydraulic lift.

Of the three images shown below which is the most stable?

Whats wrong with this picture?

Lift trucks use a hydrualic cylinder attatched to chains to raise and lower the forks.

You can drive a lift truck over any kind of surface.

Which of the following should NOT be allowed during the re-fueling or re-charging process

As a certified fork lift operator at Jule-Art it is your responsibility to load / unload and sign for materials when they come in if there are no supervisors around.

A brake pedal that slowly sinks all the way to the floor is in good operating condition.

Rear wheel stearing is used in lift trucks because it gives the operator greater control when using the forks.

It is your job to inspect the brakes, hydrualic lift system, the tires, and load prior to operating your lift truck every single day.

All industrial lift trucks are equipped with a clutch. 

Which of the following is NOT a type of lift truck?

If your truck starts to tip over:

When transporting a load you should not raise your forks more than 8” from the ground.

If the lift mechanism on your lift truck fails, you should try to do the repairs on the chains or hydraulic system yourself.

The most important safety device on your lift truck is:

Wide and long loads are more unstable than other types of loads.

When signing for materials you MUST account for everthing you are signing for, date and sign the packing list, and turn them in to the production manager.

In order to solve an “inch pound equation”, you must use information provided on the data plate.

Always check air pressure on tires from the side, not by facing the tread.

Always check air pressure on tires from the side, not by facing the tread.

Anyone who has a valid drivers license can operate a lift truck.